We have recieved 67% of our goal ..
- Become VIP Member support the forum. Donate to > info@multicsforum.com - add your member name. -
- If the donate button not works! -

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Amiko Alien SHD 8900 HD - How to install Enigma II Firmware
Quote:How to install Enigma II Firmware

First download and unzip the Enigma II firmware you wish to install.
Then place the folder named 'enigma2'
[which contains the following two files uImage & e2jffs2] on to a USB stick formatted in FAT32, and insert the USB stick into the receivers USB port located on the rear of the receiver.

Now Turn Off the receiver using the rocker switch located on the rear of the receiver.
Open the flap on the front panel of the receiver, and press the
OK button [keep the OK button depressed] and Turn the receiver On.

When you will see the message FoRc on the front panel, you can stop pressing the OK button.
Now press the
Ch down button on the front panel you stop then see ENIG, now press the Vol > button,
you will then see 'FAct' displayed for just a second or two, before the Enigma II software will start to install itself automatically, it will then display [U Ld] [the Ld will flash] once it has finished installing, you may remove the USB stick, and then simply follow the On screen setup Wizard, for those of you who have used a Dreambox in the past should be familiar with this procedure.

Free multics Exchange >> 
5x Multics R69 Brutus -C-Z/R84 Hellboy-v32/R84 Brutus-S and 3 oscam cacheex server's

dont forget to klik on the like button


--- MULTICSFORUM --- --- MULTICSFORUM ---.    --- www.multicsforum.com ---
thanks friens, usefull post

--- MULTICSFORUM --- --- MULTICSFORUM ---.    --- www.multicsforum.com ---

Forum Jump:

Users browsing this thread: 1 Guest(s)
Donation's plugin by Naoar.com